Seal & protect
For a chimney that's sound but starting to take on water. Hairline crown cracks sealed, flashing resealed, and the masonry treated with a water repellent.
- Sound brick and mortar
- Stops early leaks
- Least cost

Chimney repair
Northwest rain finds every weak spot in a chimney: a cracked crown, tired mortar, loose flashing. We repair the masonry and seal out the water, so a small problem doesn't turn into a rebuild.
Chimneys swept and inspected, so every fire burns the way it should.
Gutters and roofs kept clear, so rain goes where it belongs.
Floors covered, work areas contained, and nothing left behind.
Photos of what we find, and a written price before any repair.
What's included
Water is behind most chimney damage. We fix what's broken and deal with how the water got in.
Crumbling mortar joints ground out and repointed with new mortar matched to the old.
Cracked, loose, or flaking bricks cut out and replaced with matching brick.
Cracked crowns sealed or rebuilt with a proper slope and drip edge, so water runs off the top.
Loose or failed flashing where the chimney meets the roof repaired, resealed, or replaced.
A breathable water repellent applied to sound masonry, so rain stays out and moisture inside can still escape.
Cracked firebrick replaced and joints repointed with heat-rated refractory mortar.
Rough, gapped smoke chambers smoothed and sealed with a heat-rated coating for better draft.
When the top of the chimney is too far gone to repair, it is rebuilt from the roofline up.
Your options
We'll show you photos of the damage and recommend the smallest repair that will actually last.
For a chimney that's sound but starting to take on water. Hairline crown cracks sealed, flashing resealed, and the masonry treated with a water repellent.
For worn mortar joints, a few damaged bricks, or a cracked crown. Joints repointed, bricks replaced, and the crown rebuilt.
For a chimney top that's leaning, loose, or badly weathered. The damaged section is taken down and rebuilt with new brick, crown, and cap.
| Seal & protect | Repair & repoint | Rebuild | |
|---|---|---|---|
| Best for | Early signs of water | Worn joints and damaged bricks | Tops that are loose or leaning |
| Masonry work | Minimal | Joints and individual bricks | Whole section rebuilt |
| Time on site | Shortest | Moderate | Longest |
| Budget | $ | $$ | $$$ |
How it works
Four of the six steps happen before any work begins, so you always know what's being done and why.
Tell us what you need and where you are. We confirm a day and an arrival window.
Floors and furniture near the fireplace are covered, and outdoor work areas are set up safely.
Before any tools come out, we check the chimney, gutters, roof, or vent and take photos.
You see what we found. If anything beyond the booked service is needed, you get the price first.
The job you approved, done carefully and by the book.
We clean up, haul away debris, and walk you through what was done, with photos.
FAQ
Anything else, ask us when you book.
The usual causes are a cracked crown, a missing or damaged cap, failed flashing where the chimney meets the roof, and worn mortar joints that soak up rain. We find the source first, because sealing the wrong spot doesn't stop the leak.
It's called efflorescence: salts left behind when water moves through the brick and evaporates. The stain itself is harmless, but it tells you the chimney is taking on water.
Some can. Mortar needs to cure above freezing and out of the rain, so larger masonry jobs are usually scheduled for drier weather. An urgent leak can be covered and protected until then.
Often, yes. It starts with a Level 2 inspection to see how far the damage goes. See how inspections work.
No. Ordinary sealers and paint trap moisture inside the brick, which makes damage worse. A breathable water repellent keeps rain out while letting moisture escape.
More services
Many of these can be done in the same visit.
Tell us what your home needs. We'll confirm a time and take it from there.